Detailed Product Description

PC-6A is a new type Superplasticizer developed primarily for use in hot  and warm climate area. It contains polycarboxylate ether polymers as well as performs outstanding high water reduction and significantly reduces slump loss.  With the design for the need to improve the

initial compression strength and ultimate compression strength.

PC-6A is applying as follows :

l Concrete which contain less water content than conventional additive

l The concrete which must fast mixing logistics during large project

l High flowability concrete

l Highly durable concrete

l Ready-mixed concrete

l Mass concrete 

l Long distance transport concrete 

l Pumped concrete

l Hot weather pouring concrete

l Self compacted concrete

Main Properties and Characteristics

High water-reducing performance        High initial and ultimate strength.

                                                       Low permeability, high durability concrete.

High flowability                                  Ease of placing and compaction.

                                                        No separation.

Superior compression performance      No retempering. Ease of point construction

Low shrinkage and creep                    Improves dimensional stability. Reduces risk of cracks.

Good cohesion                                  Ease of pumping. No bleeding.

Good workability                                Excellent appearance. Self compacted concrete.

Minimal water-bleeding                       It is significantly less than BNS based products. 

                                                        Excellent concrete quality.

High elastic modulus                          Superior load bearing capacity.

Properties and Adding

                Supply form:                         Liquid

                          Color:                         Yellowish color

           Specific Gravity:                         1.1-1.15kg/ltr@25

                             PH:                         6.0-8.0

              Solid Content:                         50%

          Chloride content:                         <0.1%

Dosage

In order to meet specific requirements, its addition rate should be determined according to the materials  and the conditions of the experiments and the water-reducing request. The scope of the PC-6A addition rate is from 0.4 liter to 1.2 liter/100 kg cement materials. Other dosages may also depend on the specific working conditions. If over dosed, it will lead to delay the coagulating tiem.

Package

PC-6A is available in 200 liter/ drum or1000 liter/drum.